Friendly Flooring Contractor in City of Atwater CA - Floors That Start With a Sound Slab
Atwater Epoxy Floors and Concrete puts down epoxy garage floors and polished concrete in Atwater and nearby cities like Merced and Winton. We also resurface worn patios and put down basement floors that are easy to keep clean.
- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Epoxy and concrete flooring contractor in City of Atwater, CA
Atwater Epoxy Floors and Concrete is a flooring contractor in the City of Atwater, CA, with 16 services for garage, patio, basement, shop and kitchen floors. Most of the price comes from your slab, because cracks, old coatings, oil and moisture all have to be dealt with before anything goes down, and then from the size of the floor and the system and finish you pick. The schedule turns on that same prep and on how long each coat has to cure before you can use the floor. Your written estimate lays out every step, so you can see what you're paying for.
Epoxy Floor Coatings
Epoxy is a two-part coating that bonds to ground concrete and dries to a hard, wipe-clean surface. We put it down in garages, shops and basements.
Commercial & Industrial Epoxy Floor Coatings
Running a warehouse, plant or shop floor that takes forklifts and spills? We coat it with an industrial epoxy system built around your traffic and your downtime.
Garage Floor Coatings
Stained, dusty garage slab? We grind it, fix the cracks and coat it so oil, tire marks and dirt wipe up instead of soaking in.
Polyaspartic Floor Coatings
What's polyaspartic? It's a fast-curing coating that holds its color in sunlight, a good fit for garages and patios you want back in use quickly.
Metallic Epoxy Flooring
We pour metallic epoxy with pigments that swirl into a deep, marbled look, for homeowners and showrooms that want the floor to be the feature.
Urethane Cement Flooring
Urethane cement is a thick, cement-based floor that stands up to hot water, grease and daily wash-downs, which is why restaurant kitchens and food plants use it.
Polished Concrete Flooring
We grind your slab in finer and finer stages and harden it until it shines, so the concrete itself becomes the floor, with no coating to wear off.
Stained Concrete Flooring
Want color without a thick coating? Concrete stain soaks into the slab and gives patios, living areas and shops a mottled, earthy tone we then seal.
Terrazzo Flooring
We install terrazzo, chips of marble or glass set in a binder and ground smooth, for lobbies, entries and stores that want a polished floor with a pattern.
Basement Flooring
Basement floors deal with moisture coming up through the slab, so we check the concrete first and then pick a coating or overlay that suits it.
Concrete Grinding & Surface Preparation
This is the prep that decides whether a floor holds. We grind off sealers, glue and the weak top layer so the new coating bonds to sound concrete.
Concrete Sealing
Does bare concrete need sealing? Usually. A sealer keeps out oil, water and stains on driveways, patios and garage floors and makes them easier to clean.
Concrete Resurfacing & Overlays
Cracked, pitted or patched concrete that's still solid underneath? We bond a thin overlay over it for a fresh, even surface without tearing out the slab.
Self-Leveling Concrete & Overlays
We pour self-leveling concrete, a runny mix that settles flat on its own, to even out dips and slopes before tile, wood or a coating goes down.
Pool Deck Coatings & Resurfacing
Is your pool deck faded, cracked or slick? We repair and recoat it with a textured finish so bare feet get better grip when it's wet.
Concrete Floor Stripping & Removal
Old epoxy, paint, tile glue or carpet adhesive in the way? We strip it to bare concrete so the next floor bonds to something sound.
Why homeowners and shops pick our crew
Most floor failures I saw on commercial jobs started in the slab, not the coating. These four habits come from that, and they're how we run a home garage the same as a shop floor.
Slab checked before colors
We look at your concrete for cracks, old coatings and moisture before we talk colors or finishes, because the slab, not the coating, decides whether a floor holds up.
A straight answer if it's not ready
If your floor isn't ready for what you want, I'll tell you plainly and explain what it would take to get it there. I'd rather do that than put down a floor I don't trust.
You deal with the owner
From the first visit to the last, you deal with me, and the small crew doing the work is one I trained on the same careful prep I learned on commercial floors.
Dust kept down, home protected
We keep grinding dust under control and cover the rest of your home or shop while we work. When you're ready to talk about your floor, call (209) 203-1590 or use the form below.
Our process from first call to final walkthrough
You call or send the form, and we reply within one business day. The estimate is free, done on site and comes with no obligation.
Call or send the form
Call (209) 203-1590 or send a note through our contact page and tell us what the floor is, a garage, a patio, a shop, and what you'd like on it. We reply within one business day and set a time for me to come out and see it.
I check the slab and write it up
I come out myself to look at the floor, check the concrete and measure. Then you get a written estimate that lays out the prep, the coating system and each step in order, so nothing is a surprise later. It's free, and there's no obligation.
Our crew does the work
A small crew I trained does the work, following the plan in your estimate one step at a time. I check it along the way, mostly the prep, because that's where a floor is won or lost. Some things only show once the old surface is off, and if that happens, you hear it from me.
We walk the floor together
When the work is done, I go over the floor with you before we call it finished. We look at the surface, the edges and the joins together, and I tell you how long the coating needs before you walk or drive on it, since that depends on the system.
Tell us about the floor you have in mind
Send the form and we'll reply within one business day to set up a visit. I'll come look at the concrete, measure and give you a free written estimate with each step laid out, with no obligation.
(209) 203-1590- Based in
- City of Atwater, CA 95301
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
Epoxy and polished concrete floors
A look at the kinds of floors this trade puts down, from flake garage coatings and metallic epoxy to polished and stained concrete.
About a flooring business built on prep
Atwater Epoxy Floors and Concrete is a flooring contractor I started in the City of Atwater in 2017, after years on a big commercial flooring outfit doing warehouse, plant and shop floors. We're licensed and insured, and we offer 16 flooring and concrete services in Atwater and the cities around it, 12 of which have their own page here. Those commercial jobs taught me that most floor failures start in the slab, and that's still the first thing we look at. You can read more about me and the crew.
- services
- 16
- service areas
- 12
- founded
- 2017
- 9 years in business
Working on floors around Atwater and Merced County
Atwater is one of six incorporated cities in Merced County, and most of our calls here are for garages, patios and basements at home and for shop and kitchen floors at local businesses. The city's Building Division issues building permits and does the plan reviews and field inspections. If your job needs a permit, we tell you at the estimate and handle it with that office, and when we're not sure, we ask them before we start.
People here know the city by places like Veterans Park at Bellevue Road and Buhach Road, home to the Veterans Park Pavilion and the Atwater Youth Center, and the Castle Air Museum, which has an Atwater address next to Castle Airport and shows aircraft from before WWII to the present day. We're based in Atwater, and we bring the same prep to a home garage here as to a shop floor anywhere in the county.
Service areas around Atwater and Merced County
Atwater Epoxy Floors and Concrete is based in the City of Atwater, CA, and works across Merced County and up into Stanislaus County. The 12 cities below, including Merced and Turlock, each have their own page, and we work in other nearby cities too. Wherever you are, we reply within one business day.
Flooring contractor questions in City of Atwater
Do you charge to come out and give a flooring estimate in Atwater, CA?
No, our estimates are free, done on site and come with no obligation. I look at the concrete, measure and give you a written estimate with each step laid out, so you can compare it fairly with anyone else's.
What affects the cost of an epoxy garage floor?
The condition of your slab usually matters most, followed by the size of the floor and the coating system you choose. Cracks, old coatings, oil stains and moisture all add prep, and a flake or metallic finish takes more material and labor than a plain coat. Your estimate shows each of those as its own step.
How long does it take to put an epoxy coating on a garage floor?
It depends on how much prep your slab needs and which system goes down, and I lay out the plan at the estimate. Grinding, crack repair and moisture problems add time, and each coat has to cure before the next one and before you drive on it. A fast-curing polyaspartic top coat can get you back in sooner.
Does a flooring contractor need a license in Atwater, CA?
Yes, in most cases. The Contractors State License Board requires a state license for building or altering a structure in California when the job needs a building permit, uses employees, or totals $1,000 or more in labor and materials, and a larger job can't be split into smaller contracts to get under that amount. The city also asks every contractor to show a valid state license before it issues a City Business License. We're licensed and insured.
What happens to my concrete before you coat it?
We prepare the slab first, because that's what decides whether a coating stays bonded. That usually means grinding off the weak top layer and any old sealer, filling cracks and checking for moisture. If the concrete isn't ready for what you want, I'll say so and explain what it would take.
Do you guarantee your epoxy and concrete floors?
Yes, every floor we do is backed by our satisfaction guarantee. We'd rather catch problems in the prep than after, which is why we check the slab before anything goes down.
Should I choose epoxy or polyaspartic for my garage floor?
For a garage that opens to the sun most days, I usually lean toward a polyaspartic top coat, because it holds its color in sunlight and cures fast. Epoxy builds thicker and gives us more working time, so many systems use an epoxy base under a polyaspartic top. I make the call once I've seen your slab.
Do I need a permit for a flooring or concrete job in Atwater?
It depends on the job, and I'll tell you at the estimate whether yours needs one. If it does, we handle it with the City of Atwater Building Division, which issues building permits online, and when we're not sure, we ask that office before we start.
City of Atwater, CA
Planning a new epoxy or concrete floor in Atwater?
Call (209) 203-1590 or send the form, and we'll reply within one business day. The estimate is free and done on site, so you'll know what your slab needs before you decide.