Flooring Contractor in Delhi, CA - Garage and Shop Floors Built on Solid Prep
Atwater Epoxy Floors and Concrete is a flooring contractor from the City of Atwater, CA, coating, polishing and resurfacing garage, shop, patio and house floors for homeowners and small businesses in Delhi.
- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Delhi homes, farm shops and the slabs under them
Delhi sits across the Merced River from Livingston. On our jobs here, it's a mix of neighborhood homes with attached garages and bigger parcels where a shop or equipment barn stands near irrigated fields. We get calls from both, and from small businesses that need a kitchen or work floor redone.
Those two kinds of property need different floors. A house garage usually needs crack repair and a coating that holds up to hot tires, while a farm shop slab often carries years of oil, fertilizer and old paint that we have to grind away before anything new will bond.
Flooring services we bring to Delhi homes and shops
Epoxy Floor Coatings
A good fit for a Delhi garage or laundry slab that's dusty and stained, because sealed epoxy wipes clean and stops the concrete shedding grit.
Commercial & Industrial Epoxy Floor Coatings
For shops, packing sheds and small plants around Delhi, where forklifts, tractors and spilled chemicals wear through bare concrete and plain paint fast.
Garage Floor Coatings
Garages are a common call in Delhi. We grind the slab, fill cracks and lay a flake coating that stands up to hot tires and dropped tools.
Polyaspartic Floor Coatings
When you can't spare the garage or shop for long, polyaspartic cures faster than most epoxy, so your truck and tools come back in sooner.
Metallic Epoxy Flooring
For a Delhi living room, home bar or showroom where you want a glossy, swirled finish instead of carpet or tile over the slab.
Urethane Cement Flooring
Built for Delhi restaurant kitchens, food prep rooms and wash bays, where hot water, grease and steam cleaning would lift a standard epoxy off the concrete.
Polished Concrete Flooring
If your Delhi home or shop already has a sound slab, we grind and polish it to a hard, easy-mop shine with no coating to peel.
Stained Concrete Flooring
A way to give a Delhi patio or older interior slab warm color without covering it, though stain shows the concrete's marks rather than hiding them.
Terrazzo Flooring
For an entry, church hall or business lobby in Delhi that sees steady foot traffic and needs a floor that wears slowly and cleans easily.
Basement Flooring
When a below-grade room or cellar is damp, we test the slab for moisture first, because a coating laid over a wet floor won't stay put.
Concrete Grinding & Surface Preparation
Every floor we lay starts here. We grind off old sealer, glue and paint so the new coating bonds to clean, open concrete, not to the old mess.
Concrete Sealing
Good for driveways, walkways and shop aprons around Delhi that take dust, fertilizer and oil drips, so stains sit on the sealer instead of soaking in.
Concrete Resurfacing & Overlays
When an older Delhi slab is scaled, pitted or patched but still solid underneath, an overlay gives you a fresh surface without tearing it out.
Self-Leveling Concrete & Overlays
For uneven floors in older Delhi homes and add-on rooms, we pour a self-leveling layer so new tile, vinyl or a coating sits flat.
Pool Deck Coatings & Resurfacing
For backyard pool decks in Delhi that have cracked, stained or turned slick, we resurface them with a textured coating that's easier on bare feet.
Concrete Floor Stripping & Removal
When an old coating is peeling or a previous owner left paint, carpet glue or tile adhesive, we strip it down to bare concrete before anything new goes on.
Get a free on-site floor estimate in Delhi
We reply within one business day to set up a visit. The estimate is free, done at your property, and comes with no obligation.
(209) 203-1590- Based in
- City of Atwater, CA 95301
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
Working in Delhi with Merced County on permits
Merced County serves Delhi, so the county is who we deal with on building questions here. If your parcel is in the county's unincorporated area, a building permit comes from the county's Building and Safety office, and a parcel inside a city goes to that city instead. Every county building permit also gets a look from the county's planning department, so when a job needs one, that review sets our start date. Every business working in unincorporated Merced County needs a county business license, and you can check a license's status on the county permit portal before you hire anyone. If your floor needs a permit, I tell you at the estimate and we handle it with the county, and when I'm not sure, we ask that office before we start.
The price of a Delhi floor comes down mostly to what's already on the slab and what you want on top of it: the square footage, how many cracks need filling, whether old paint or sealer has to come off, whether the concrete holds moisture, and which system you pick. The schedule turns on that same prep, on the cure time for the system and on any county review, not on the drive, since Delhi is an easy run from our base in Atwater, the same as our trips to Merced and down to Chowchilla. Your written estimate puts your own figure on all of it, step by step.
Shop slabs and irrigated ground around Delhi
Delhi is in the Turlock Irrigation District, which supplies farm water here, so many of the slabs we look at sit on parcels with fields close by and a shop that's seen real work. Water in the ground can come up through concrete and push a coating off from underneath, so we take moisture readings before we pick a system and tell you plainly if the slab isn't ready. On shop floors, fertilizer, diesel and hydraulic fluid soak into bare concrete, which is why we grind down to clean concrete instead of coating over the stains.
Older Delhi garages usually come with some history too: patched cracks, peeling paint from a weekend project, or a sealer nobody remembers putting down. We strip and grind that off first, because a new floor only holds as well as what it's bonded to.
What to expect when you call us about a Delhi floor
Here's how a Delhi job runs from your first call to the final walk-through, and who you'll deal with at each step.
Call or send the form
You call (209) 203-1590 or send the form, and we set a time for me to come out. It helps if you're there, so you can show me how you use the space.
I check and measure the slab
I come out myself, look at the cracks, old coatings and moisture, and measure the floor. You get a written estimate that lays out the prep, the system and each step in order, so nothing in the cost is a surprise later.
Clear any county review, then work
If the county needs a permit, its review comes first, and we book the work once it clears. Then the small crew I trained follows the written plan, and I check the floor as it goes down.
Walk the finished floor together
Before we call it done, I go over the floor with you. We tell you when it's ready to walk on and when you can drive or roll equipment back on, because that depends on the system.
Questions about flooring contractors in Delhi
Do I need a permit to coat or polish a concrete floor in Delhi, CA?
It depends on the work, so we settle it at the estimate instead of assuming either way. A coating on an existing slab and a floor that's part of a remodel or addition aren't the same job, and when the answer isn't clear, we ask the county's Building and Safety office before we start.
How do I send a building permit application to Merced County from Delhi?
You can email application submittals and corrections to the county's Building and Safety office at permits@countyofmerced.com. The county's Buildings Division also answers questions at (209) 385-7477 or Buildings@countyofmerced.com. When one of our floor jobs needs a permit, we handle that paperwork with the county for you.
Does a restaurant kitchen floor in Delhi need extra county review?
It can, if the permit includes or affects a grease trap, because Merced County sends those to its Environmental Health Division for review. Permits for new structures or additions also go to the fire department, so a kitchen floor that's part of a bigger build-out can pass through more than one desk. I'll flag that at the estimate so your reopening date allows for it.
How much does an epoxy garage floor cost in Delhi, CA?
Your price comes from a written estimate after I've seen the slab, because the concrete decides more of the cost than the coating does. The size, crack repair, old paint or sealer to strip and any moisture work move the number, and so does whether you pick flake epoxy, polyaspartic or a polished finish.
What causes epoxy to peel off a garage or shop floor?
Most peeling starts in the slab, not the coating, from a surface that wasn't ground open, old sealer left on, oil soaked in or moisture pushing up from below. On commercial floors I saw plenty fail that way, which is why we grind, clean and test every slab before we coat it, and why I'll tell you if yours isn't ready.
What is the best way to prep an old farm shop slab in Delhi for a new floor?
Grind it down to clean, open concrete, because a coating can't bond through oil, fertilizer residue or old paint. We degrease the worst spots, strip what's left, fill cracks and check moisture before we choose a system, and a shop that gets hosed down with hot water may be better off with urethane cement than epoxy.
City of Atwater, CA
Get your Delhi floor looked at
A look at the slab now tells you what it needs before you pick a finish, so call (209) 203-1590 or send the form.