Flooring Contractor in Winton, CA - Coated and Polished Floors Built on Good Prep
Atwater Epoxy Floors and Concrete is a flooring contractor serving Winton, CA. We coat, polish, seal and resurface concrete floors here, from garages, patios and basements to shop and kitchen floors for small businesses.
- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Winton floors we see just north of Atwater
Winton is right next door for us. It sits just north of the City of Atwater, CA, where we're based, and about five miles from Livingston. It's an unincorporated community in Merced County, mostly homes, with small shops and businesses mixed in.
The calls we get from Winton look a lot like the ones from Atwater. Homeowners want a garage floor that stops staining and dusting, or a patio that finally looks finished. Small business owners want a shop floor that takes traffic, or a kitchen floor they can scrub hard and hose down. Most of these slabs have years of use on them, with oil, tire marks, old sealer or paint and a crack or two. So the job here usually starts with finding out what's in and on the concrete before anything goes on top of it.
Floor services for Winton homes and shops
Epoxy Floor Coatings
A good fit for Winton garages, workshops and utility rooms that need a tough, easy-to-clean surface, once we've ground the slab so the epoxy actually bonds.
Commercial & Industrial Epoxy Floor Coatings
For shops, small warehouses and back-of-house floors in Winton that take forklift, cart or foot traffic all day, built the way I learned on commercial plant floors.
Garage Floor Coatings
A lot of Winton calls start in the garage, where oil drips and hot tires lift weak coatings. We prep the slab so the new floor stays put.
Polyaspartic Floor Coatings
When you want the garage or shop back in use quickly, a polyaspartic topcoat cures faster than epoxy and holds its color in an open-door garage.
Metallic Epoxy Flooring
For a Winton living room, studio or showroom floor where you want a glossy, marbled look on the concrete instead of tile or carpet.
Urethane Cement Flooring
The right call for a restaurant or food-prep kitchen in Winton, where hot washdowns, grease and heavy cleaning would break down a standard epoxy floor.
Polished Concrete Flooring
If your slab is sound, we grind and polish it into a hard, low-maintenance floor for a shop or living space, with nothing on top to peel.
Stained Concrete Flooring
Gives a plain gray patio, porch or interior slab some color without a thick coating, and works best when the concrete takes stain evenly, which we test first.
Terrazzo Flooring
For a storefront, lobby or entry in Winton that gets a lot of foot traffic, with marble or glass chips set in a binder, then ground and polished.
Basement Flooring
Where a Winton home or shop has a basement, we check the slab for moisture before we pick a coating, so it doesn't bubble or lift later.
Concrete Grinding & Surface Preparation
This is where most floors are won or lost. We diamond-grind old sealer, paint and glue off the slab so the next coating grips bare, open concrete.
Concrete Sealing
A sealer helps a Winton driveway, patio or garage floor shrug off oil and water stains, and it's a good fit for sound concrete that only needs protection.
Concrete Resurfacing & Overlays
When a patio, walkway or garage slab is pitted, scaled or patched but still solid underneath, an overlay gives it a fresh surface without tearing it out.
Self-Leveling Concrete & Overlays
For a wavy or uneven slab in a Winton house or shop, a self-leveling pour fills dips and low spots before new flooring or a coating goes down.
Pool Deck Coatings & Resurfacing
For a pool deck that's cracked, rough on bare feet or slick when wet, we resurface or coat it with a textured finish that's easier to walk on.
Concrete Floor Stripping & Removal
When a Winton floor has a failing coating, old tile glue or layers of paint, we strip it to clean concrete before anything new goes on.
Get a free written floor estimate in Winton
We reply within one business day to set a time. I come out to look at your concrete and measure, then you get a free written estimate with each step laid out, and there's no obligation.
(209) 203-1590- Based in
- City of Atwater, CA 95301
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
What working in Winton means for permits and licenses
Winton isn't an incorporated city, so building permits here come from Merced County's Building and Safety Division. If your floor needs a permit, I'll tell you at the estimate and we handle it with that office. Your start date waits on it, so it's one of the first things I check. Before you hire anyone for a floor here, ask for a California contractor license and a Merced County business license. We're licensed and insured.
What moves the price here is the size of the floor and, even more, the shape the slab is in. Old coatings or sealer that have to come off, oil soaked into a garage floor, cracks and low spots, and how much grinding it takes to reach clean concrete all add time and material, and so does the system you choose. The schedule turns on that same prep, on a permit when there is one, and on how long the coating needs before you walk or drive on it. It's the same work and the same checks we do in Merced, and your written estimate lays out each piece for your floor.
Garage and shop floors here take hard use
Garage floors here carry cars, oil drips and years of spills, and a bare slab dusts, stains and soaks up whatever lands on it. Patios and pool decks wear in their own way, with scaling, old paint and cracks you notice every time you step outside. We start by grinding to clean, open concrete and repairing what we find. Then we coat, seal or resurface to suit how you use the space, because a coating only holds as well as the slab under it.
Shop and kitchen floors at Winton's small businesses take heavier use, from carts and equipment to grease and daily washdowns. For those we lean toward commercial epoxy or urethane cement, which are the systems I'd trust on a working floor.
What to expect when you call us about a Winton floor
Here's how a floor job runs from your first call, so you know who you'll deal with and what you'll have in hand before any work starts.
Call or send the form
Call (209) 203-1590 or send the form, and we'll set a time for me to come see the floor. You don't need to know which coating you want yet.
I check and measure the slab
I come out myself to look at the slab, test the concrete and measure, then write an estimate that lays out the prep, the system and each step in order, so nothing on the price surprises you later. If the concrete isn't ready for a coating, I'll tell you then instead of quoting a floor I don't trust.
Our crew follows the plan
A small crew I trained does the work, starting with grinding and repairs, and I check it along the way. If your job needs a permit, we handle it before work starts.
We walk the floor together
I go over the finished floor with you before we call the job done. We'll tell you when it's ready for foot traffic and when it's ready for a car.
Flooring contractor questions from Winton homeowners
Do I need a building permit to coat my garage floor in Winton, CA?
Merced County's permit guide lists floor coverings among the work that needs no building permit, except in a commercial building that's changing its use or occupancy. The county calls its list a rule of thumb with exceptions, so I look at your job at the estimate and tell you whether it needs one. When we're not sure, we ask the county's building office before we start.
How do I get a building permit for a commercial floor in Winton?
Under state law, with a few exceptions, only the property owner or a licensed contractor can get a building permit, so if your shop or kitchen floor needs one, we handle it for you. The county's planning staff are the first stop for zoning approval on a project. A permit can be issued over the counter when no plans are needed and no other department has to review the work.
Does a flooring contractor need a California license to work in Winton?
Yes, the state requires a contractor license when the job needs a building permit, uses employees, or costs $1,000 or more in labor and materials combined. A home improvement contractor has to hold that license before bidding, with a couple of narrow exceptions, so ask for it before you take a quote.
Does a contractor need a Merced County business license to work in Winton?
Yes, every business located in or doing business in unincorporated Merced County has to get a county business license, and Winton is unincorporated. It's a fair thing to ask any contractor about along with their state license.
How much does it cost to coat a garage floor in Winton, CA?
The price of a garage floor in Winton comes from its size, the shape the slab is in and the coating system you pick, and I give you that number in writing after I've seen the floor. Grinding off an old coating, filling cracks or dealing with a damp slab adds to it. A full flake system with a polyaspartic topcoat costs more than a sealer or a single coat.
What causes epoxy garage floors to peel?
Most peeling starts in the slab, not the coating, when epoxy goes over concrete that was sealed, oily, damp or never ground open. Hot tires then pull the weak spots loose. I saw plenty of that on commercial floors before I started this business, so we grind to bare, open concrete and check the slab before anything goes down.
City of Atwater, CA
Get your Winton floor looked at
A look at the slab now tells you whether it's ready for a coating, needs repair first or would make a better polished floor, before you spend anything.