Flooring Contractor in Turlock, CA - Garage, Shop and Patio Floors Built on Good Prep
Atwater Epoxy Floors and Concrete is a flooring contractor working in Turlock, CA. We coat garage floors, grind and polish shop and store floors, and resurface patios and pool decks, starting with a close look at the slab.
- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Turlock homes, shops and slabs as we find them
Turlock is one of the bigger cities we work in, a short drive from our base in Atwater into Stanislaus County. It's flat ground with older homes toward the middle of the city, newer subdivisions on the edges, and plenty of shops, warehouses, and food and farm businesses tied to the valley. A lot of what we see here looks like what we see up the road in Ceres, with homeowners calling about garages and patios and business owners calling about shop and kitchen floors.
Older houses usually mean garage slabs with decades of oil, patched cracks and sometimes a coat of paint someone rolled on years ago. Newer houses tend to have cleaner slabs, but a builder's sealer or a slick troweled finish still has to be ground off before a coating will hold.
Floor and concrete work we do in Turlock
Epoxy Floor Coatings
A tough, easy-to-clean coat for garages, laundry rooms and workshops in Turlock homes, put down after we grind the slab so it grips instead of peeling.
Commercial & Industrial Epoxy Floor Coatings
For shops, warehouses and food or farm businesses around Turlock that run forklifts, carts and washdowns, built in layers thick enough for that kind of traffic.
Garage Floor Coatings
A garage that's carried cars for years needs the oil and tire marks ground out first, then cracks filled, then a flake coating you can hose off.
Polyaspartic Floor Coatings
A faster-curing, sun-stable topcoat that suits Turlock garages with the door open to afternoon sun and patios that bake through a valley summer.
Metallic Epoxy Flooring
A poured, marbled finish for living spaces, showrooms and offices in Turlock, worth doing only on a flat, well-prepped slab because every low spot shows through.
Urethane Cement Flooring
Built for commercial kitchens, food plants and wash-down rooms in Turlock where hot water, grease and cleaning chemicals wear down an ordinary epoxy coating.
Polished Concrete Flooring
We grind and polish the slab itself to a hard sheen, which suits retail floors, offices and Turlock homes with sound concrete under old carpet.
Stained Concrete Flooring
Color soaked into the concrete for patios, entries and rooms where you've pulled up old flooring and want a warm, low-upkeep look without a thick coating.
Terrazzo Flooring
A long-lasting chip-and-resin floor for lobbies, stores and entryways in Turlock that take steady foot traffic and need to look clean every day.
Basement Flooring
For the below-grade rooms and cellars we do find around Turlock, we test the slab for moisture first, because damp concrete is what lifts a basement floor.
Concrete Grinding & Surface Preparation
The step that decides whether any floor lasts. We grind off the old paint, sealer and carpet glue left on Turlock slabs so the new coating bonds to open concrete.
Concrete Sealing
A clear seal for patios, walkways and garage aprons that take winter rain and summer sun, so water and stains stay on top instead of soaking in.
Concrete Resurfacing & Overlays
When a Turlock patio or garage slab is pitted and patched but still solid underneath, an overlay gives it a new face without tearing it out.
Self-Leveling Concrete & Overlays
For uneven slabs in older Turlock homes and shops, we pour a self-leveling layer so tile, vinyl or a coating sits flat instead of showing every dip.
Pool Deck Coatings & Resurfacing
Backyard pool decks here take hard summer sun, so we repair the cracks and lay a textured coating that gives bare, wet feet something to grip.
Concrete Floor Stripping & Removal
Before anything new goes down, we take up old epoxy, paint, tile mastic or failed coatings, which we see a lot on Turlock garages coated years ago.
Get a written floor estimate for your Turlock property
We reply within one business day to set up a visit. The estimate is free, done on site at your property, and comes with no obligation.
(209) 203-1590- Based in
- City of Atwater, CA 95301
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
Permits and licenses for floor work in Turlock
Building permits in Turlock come from the city's Building & Safety Division. The city puts the permit on the property owner, though a licensed contractor can apply and sign for you, and it has to be issued before any work starts, so on a job that needs one, the permit sets the start date. Before you hire anyone, ask for their state license from the Contractors State License Board and their Turlock business license, which the city requires of every business working here. We're licensed and insured.
If your floor needs a permit, I'll tell you at the estimate and we take care of it with the city. What moves the price is mostly the slab: how much old coating or oil has to come off, how many cracks need filling, the square footage and the system you choose. The schedule turns on the same things plus the cure time of the coating, and the written estimate lays out each step so you can see where the time goes. The same crew works in nearby Hilmar and Keyes too.
Why Turlock floors need more than a quick coat
Most Turlock garages we walk into have years of oil, tire marks and patched cracks, and a fair number have a store-bought coating that's already flaking. A new coat over that peels the same way, because it's sticking to the old mess and not the concrete. So we strip what's failing, grind the slab open, fill the cracks and check for moisture before I'll recommend a system. Shops and food businesses get the same treatment, only with thicker builds for the traffic.
Patios and pool decks here sit in full valley sun for months, and that fades and chalks a coating that isn't made for it. Outside, we lean toward sun-stable topcoats and textured finishes that stay grippy when wet.
How a floor job runs when you call us in Turlock
Here's how it goes from your first call to the walk-through at the end, with a written estimate in your hands before any work starts.
Call or send the form
Call (209) 203-1590 or use the form, and we'll set a time that works for you. It helps if you're home so you can show me what bothers you about the floor.
I look at the slab
I come out myself to check the concrete for cracks, old coatings and moisture, and to measure. You get a written estimate that lays out the prep, the system and each step in order, so nothing is a surprise later.
Our crew does the work
A small crew I trained does the stripping, grinding, repairs and coating to that written plan. I check the floor along the way, especially after the prep, because that's where a floor is won or lost.
We walk the floor together
Before we call it done, I go over the finished floor with you and tell you when it's ready for feet and when it can take a car. The job is backed by our satisfaction guarantee.
Questions about floor coatings in Turlock
Do I need a city permit to coat my garage floor in Turlock?
It isn't settled by the city's list, so don't assume you're clear. The city's permit list names remodels, additions, re-roofs and similar work, and the city says work that isn't on it may still need a permit. When we're not sure, we ask Building & Safety before we start.
Which building codes apply to a new permit application in Turlock?
The 2025 California Building Codes apply to every new permit application the city receives starting January 1, 2026, including the 2025 California Residential Code. For a floor job that mostly matters when the floor is part of a bigger project that already needs a permit, such as a remodel.
What causes an epoxy garage floor to peel?
Most peeling starts in the slab, not the coating. Oil, old sealer, a slick troweled surface or moisture coming up through the concrete keep epoxy from bonding, and I saw plenty of commercial floors fail exactly that way. That's why we grind the slab open and test for moisture, and why I'll tell you if your concrete isn't ready.
How much does an epoxy or polished concrete floor cost in Turlock?
The price comes mostly from the condition of your slab and the system you pick, with size close behind. Stripping an old coating, grinding out oil, filling cracks or treating moisture all add work, and a metallic or polished floor takes more steps than a flake garage coat. You get a written estimate at the visit with each step and its cost laid out.
How much can a contractor ask for as a down payment in California?
On a home improvement job, the state licensing board caps the down payment at $1,000 or 10 percent of the total contract price, whichever is less. The board says that rule applies to all home improvement projects, so a floor coating is covered the same as any other job.
What is the best way to coat a garage floor in Turlock that gets wet in winter?
Find where the water comes in and test the slab for moisture first, because a coating over damp concrete is usually the first to let go. Turlock's flat ground can see shallow flooding after heavy winter rain, though the city says no part of the city sits in a FEMA 100-year or 500-year flood plain. On garages that get wet, we usually add grit to the topcoat so it isn't slick and pay extra attention to the apron where water runs in.
City of Atwater, CA
Book your Turlock floor estimate today
Calling before you move furniture or line up other trades lets us fit the prep and cure time into your plans instead of around them.