Metallic Epoxy Flooring in City of Atwater CA - a one-of-a-kind floor on sound concrete
Tired of a gray, stained slab? We prep the concrete first, then lay a metallic floor with its own swirl and depth.
- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Is a metallic epoxy floor right for my concrete?
Metallic epoxy flooring in the City of Atwater is a coating system for concrete. A colored base coat goes down first. A see-through metallic coat goes over it, and its pigments spread into a pattern no other floor will have. A clear topcoat in satin or gloss protects it. On most jobs the floor is out of use for a few days while the coats cure.
Most people who call me have a garage, basement or shop slab that's stained, patched or just plain gray, and they want something that looks like more than a coating. The price moves with the size of the floor, how much repair the concrete needs before anything goes on it, and which colors and topcoat you pick. The schedule turns on the slab itself, because concrete that's too new or too damp has to wait, and then on how long each coat takes to cure. I check all of that on site, and your written estimate gives you the figure for your floor.
How do you know your concrete floor is due for a new finish?
Dusty, stained bare concrete
Bare concrete sheds a fine gray dust and soaks up oil, paint and spills, which usually means it was never sealed or coated. The longer it goes, the deeper those stains sit, and the more grinding it takes to get back to a clean surface.
Old coating flaking off
Paint or a kit coating that's peeling in sheets usually never bonded to the concrete, often because the prep was skipped. If you leave it, more of it lifts, and all of it has to come off before a new floor goes down.
Cracks, pits and patches
Cracks, chipped spots and old patch work usually mean the slab needs repair before any coating goes on. The edges keep breaking away under traffic, so a small repair now tends to become a bigger one next year.
How we lay metallic epoxy flooring
I start by checking the concrete and measuring, because the slab decides what the job needs. Then we grind the surface so the coating has something to grip, and we fix cracks, pits and old patches, because a smooth metallic finish shows whatever is underneath. The base color shapes how the finished floor looks, so we choose it with you, and we can lay a small sample area first so you see the look before we do the whole room. After that the base coat goes down, then the metallic coat, which we work while it's wet to set the pattern, and then the clear topcoat. We clean up as we go and leave the space ready to cure.
Not every slab wants a metallic coating. Polished concrete flooring grinds the concrete you already have to a sheen, with no coat on top. On a shop or commercial kitchen floor where a decorative coating would take a beating, urethane cement flooring is usually the better fit.
Light or dark base color
A light base brings the metallic up bright, which suits basements and rooms that don't get much daylight. A dark base gives a deeper, darker look that suits a showroom or a garage you want to show off.
Satin or gloss topcoat
Gloss shows off the depth in the pattern and suits a room you want to look finished. Satin plays down dust and scuffs, so it's usually the pick for a garage or shop floor that gets used hard.
Get a written estimate for your metallic floor
Send the form and we reply within one business day to set a time. I come out, check the concrete and measure, and the estimate is free with no obligation.
(209) 203-1590- Based in
- City of Atwater, CA 95301
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
What happens after you call about a metallic floor in Atwater?
Here's how a metallic floor job runs with us, from your first call to the walk-through at the end.
I come out and look
You call or send the form, and I come out myself to look at the floor, check the concrete and measure. I'm looking for cracks, patches, old coatings and anything else that would show through a metallic finish.
You get the written plan
You get a written estimate that lays out the prep, the system and each step in order, so nothing is a surprise later. If the job needs a permit, I tell you then, and since the city's permit counter is open only on weekdays and closes for lunch at midday, we plan that paperwork around those hours.
Crew works, then we walk it
Our crew works to that plan, and I check the floor along the way. When the last coat has cured, I go over the floor with you before we call it done.
Why Atwater owners call Atwater Epoxy Floors and Concrete for metallic floors
The owner checks every slab
I write every estimate myself, because years on warehouse and plant floors taught me that most failures start in the slab, not the coating. If your concrete isn't ready, I'd rather tell you than put a floor on it I don't trust.
A crew I trained myself
We've been in business since 2017, and a small crew I trained lays the floor while I check the work as it goes. You deal with the same people from the estimate to the walk-through, and the job is backed by our satisfaction guarantee.
Licensed and insured flooring contractor
We're licensed and insured. California's contractor licensing board defines a flooring contractor as one who prepares the surface and installs the flooring, and on a metallic floor the preparing decides how the finish looks.
A metallic floor only looks as good as the concrete under it, so the first step is a look at yours. Ask for an estimate or call (209) 203-1590.
Metallic epoxy and the concrete work around it in Atwater
The City of Atwater Building Division runs the permit counter for building work in the city, and its plan reviews and field inspections check that work meets safety and health standards, local ordinances and state rules. I won't guess whether a coating job like yours needs a permit. If it does, I tell you at the estimate and we handle it with the city, and when I'm not sure, I ask that office before we start.
Homeowners here mostly call us about garages, patios and basements, and small business owners about shop and kitchen floors, so the garage, with its door open to the afternoon sun, is where the topcoat choice comes up most. We do the same prep on jobs in Merced and Winton, working with whichever city or county building office covers the address.
Questions about metallic epoxy flooring in Atwater
How much does metallic epoxy flooring cost in Atwater, CA?
Epoxy floor coating in Merced usually costs about $3 to $12 per square foot, and that range covers epoxy coatings in general, not metallic floors in particular. Where your floor lands depends on its size, how much repair the slab needs, the colors and the topcoat. Your written estimate gives you the figure for your floor.
How long after metallic epoxy is installed can I walk on it?
It depends on the topcoat. One supplier's polyaspartic clear coat is walkable in as little as 6 to 10 hours, depending on temperature, while its water-based urethane takes light traffic at 24 hours and heavy traffic at 72 hours. If you need the room back fast, tell me at the estimate and we'll weigh the topcoat with that in mind.
Will metallic epoxy work on my garage floor?
Usually, once the slab checks out, but the garage is where the topcoat matters most. One guide says an epoxy clear coat yellows within one summer of sun coming through the garage door, so garages call for a UV light-stable urethane topcoat. The same guide puts a standard garage at 12 to 17 labor hours spread over 2 to 3 days, so plan on keeping the car out for that stretch.
What causes a metallic epoxy floor to fail?
Most of the failures I've seen started in the concrete, not the coating, and moisture coming up through the slab is one way that happens. One maker's guide says a slab poured on the ground needs a suitable moisture barrier beneath it, and without one, seasonal ground moisture can push vapor through even when tests before coating looked fine. That's why I check the slab before anything else.
How long does new concrete need to cure before metallic epoxy goes on?
At least 28 days, according to one maker's guide. If your slab is fresh, we count from the day it was poured and set the start date from there.
Who do I ask about permits for flooring work in Atwater?
Ask the city's Building Division, which you can reach at building@atwater.org. If your job turns out to need a permit, we take care of it with them.
Other floors we lay on Atwater concrete
Urethane Cement Flooring
A good fit when your floor takes hot water, steam cleaning or heavy carts every day, the way commercial kitchens and food shops do.
Polished Concrete Flooring
Worth a look if you want a shiny floor without a colored pattern, since the shine comes from the concrete you already have.
Cities we work in around Atwater
Atwater Epoxy Floors and Concrete is based in the City of Atwater, CA, and works in the cities around it, in Merced County and up into Stanislaus County. Livingston and Turlock are among the 12 cities with their own page below.
City of Atwater, CA
Get your metallic floor started with a visit
If you know the room, its rough size, how old the slab is and a base color you're leaning toward when you call (209) 203-1590 or send the form, I can come out ready to talk through your floor.