Pool Deck Coatings & Resurfacing in City of Atwater CA - a fresh deck on sound concrete
Paint flaking or cracks by the pool edge? We check the slab first, strip the old finish and give your deck a new surface.
- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Can my pool deck be resurfaced instead of torn out?
Pool deck coatings and resurfacing in the City of Atwater, CA renew the concrete you already have instead of breaking it out, and at Atwater Epoxy Floors and Concrete we start by checking whether your slab and the ground under it are sound enough for that.
Most people call when the deck is flaking, cracking along the pool edge or wearing rough where everyone walks. What moves the price is the size of the deck, how many layers of old paint or sealer have to come off, how much crumbling concrete needs repair and which surface you pick. The schedule turns on the same things, mostly on how much prep the slab needs, because concrete floor stripping and removal and repairs have to be finished before anything new goes down. After I look at your deck, you get a written estimate with each of those steps laid out.
How do you know your pool deck needs resurfacing?
Paint peeling in sheets
Peeling paint usually means a new coat went over an old finish that never came off, or the old coating has simply given out. Every season you wait, more of it lifts and the bare patches spread, which means more stripping later.
Cracks along the pool edge
Cracks where the deck meets the coping usually mean the slab is pushing against the pool edge with no flexible joint to take the movement. Left alone, that pressure can crack the coping itself, and that's a bigger repair than the deck.
Crumbling or sunken spots
Concrete that breaks up underfoot or sits lower than the slab around it can mean the surface has worn through or the ground under it has moved. It needs a proper look before any coating goes on, because waiting can turn a resurfacing job into a replacement.
How we handle pool deck coatings and resurfacing
I start by checking the deck and what's under it, because resurfacing only makes sense on a slab that's sound, and I'll tell you if yours isn't. Then we power wash to get off dirt, grease, mildew and loose paint, and we take every old coating or sealer off before anything new goes on, since new paint over an old finish can crack and flake off early. Concrete that's crumbling, loose or uneven comes out next so the new surface isn't sitting on a weak spot. We also look closely at the joint where the deck meets the coping, the cap along the pool edge. One coping maker's installation guide calls for a gap there filled with flexible sealant, because without it the deck can push on the coping and the bond beam, the concrete band along the top of the pool wall, and cause cracks or spalling, which is the surface flaking away. Once the slab is clean and sound and that joint is right, the new surface goes on.
Some decks carry so many layers of paint and sealer that taking them off is a job of its own, and we handle it the same way we do concrete floor stripping and removal on other slabs. If you like how a coating wears outside, the same prep habits carry over to epoxy floor coatings for a garage or patio.
Concrete resurfacing
Concrete is the most common choice for pool decks and the easiest to customize in color and texture. It suits you if design choice matters more to you than keeping upkeep to a minimum.
Epoxy pebble
Epoxy pebble is harder to put down than concrete, but it's durable and needs little maintenance. It suits you if you'd rather spend less time looking after the deck once it's done.
Coating over existing concrete
A paint or coating over the slab you have suits a deck that's structurally sound and just looks tired. It only works once the old finish is completely off, so stripping is part of this option every time.
Get a written estimate for your pool deck
Send the form and we'll reply within one business day to set a time. I'll come out, check the concrete and measure, and the estimate is free, done on site, with no obligation.
(209) 203-1590- Based in
- City of Atwater, CA 95301
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
What happens after you call about your pool deck?
From your first call to the final walk-around, you deal with me directly, and you see the whole plan in writing before any work starts.
Call or send the form
Call (209) 203-1590 or use the form, and we set a time for me to come out. Rough square footage and a few photos of the problem spots help me know what to look for.
I check the deck myself
I look at the concrete, the old coatings, any cracks and the joint at the pool edge, and I measure. If something under the slab worries me, you hear it then.
You get a written estimate
The estimate lays out the prep, the surface and each step in order, so the price isn't a guess. Nothing gets added later that you didn't see on paper.
We work and walk it
Our crew works to that written plan, and I check the job along the way. Before we call it done, I go over the deck with you.
Why Atwater pool owners call us about their decks
The owner checks your deck
I come out myself to look at the concrete and write the estimate, and a small crew I trained does the work while I check it along the way. The person who judged your slab is the one making sure the plan gets followed.
Prep habits from commercial floors
I spent years on warehouse and plant floors before starting this business in Atwater in 2017, and most failures I saw started in the slab. That's why prep is the part of your deck job we spend the most care on.
We're licensed and insured
We're licensed and insured. You shouldn't have to wonder about that on work done around your pool and your house.
Backed by our satisfaction guarantee
Our work is backed by our satisfaction guarantee. I'd still rather tell you up front that your concrete isn't ready than put a coating on it I don't trust.
On a pool deck, the slab and the edge joint decide how well the new surface holds up, so that's where we start. Tell us about your deck and I'll come out to look.
Pool decks, coatings and concrete repair in Atwater
In Atwater, the city's Building Division issues building permits and takes submittals, plan reviews and payments through the city's online permit system, and it runs the field inspections. Whether a deck resurfacing job needs a permit isn't something I guess at. If yours does, I'll tell you at the estimate and we handle it with the city or county building office, and when we're not sure, we ask that office before we start.
Merced County has more high shrink-swell clay, soil that swells when it's wet and shrinks as it dries, than the California average, though it matters on some lots far more than others. Winters here are mild, and the city's building criteria rate weathering as negligible, so on decks around here I worry less about frost and more about the ground moving under the slab. That's why I check the base before I quote. We're based in Atwater and work the cities around it in Merced County and up into Stanislaus County, and we check decks the same way on jobs in Merced and Turlock.
Questions about pool deck resurfacing in Atwater
How much does pool deck resurfacing cost in Atwater, CA?
Across the US, pool deck resurfacing usually costs about $3 to $12 per square foot, according to national pricing guides. Where your deck lands depends on how much old coating comes off, how much concrete needs repair and which surface you choose. Your written estimate spells out each of those for your deck.
Should I resurface or replace my pool deck?
Resurfacing is the better buy as long as the concrete is mostly in good shape and the subbase, the packed ground under the slab, is stable. If either one isn't, a new surface won't fix it. I check both at the estimate and tell you which job you're actually looking at.
What causes cracks in a pool deck, and can you resurface over them?
Cracks usually come from the slab moving, either against the pool edge or because of the ground under it, and many can be repaired and resurfaced over. A crack that could point to a problem in the base has to be dealt with first. We check each crack at the estimate, and you can ask me exactly what that check found.
How often should the joint at the pool edge be checked?
One coping maker's guide says to inspect that joint every year and replace the caulk when it cracks, pulls away or breaks down. Most rubbery, elastomeric caulks last five to ten years, so on an older deck it's often due by the time you're resurfacing.
How do I make my pool deck less slippery?
Pricing guides rate spray texture and rubber coatings as the best ways to add grip to a worn pool deck. The same guides note that one non-slip coat for concrete decks helps lower the surface temperature and helps the concrete last longer. We'll go over which fits your deck at the estimate.
What license does a contractor need to resurface a pool deck in California?
California's Contractors State License Board has a C-8 concrete contractor class that covers forming, pouring, placing, finishing and installing flat concrete work, and it doesn't cover contractors whose only business is applying plaster coatings. Plenty of contractors work with concrete, so if you're choosing a concrete surface, it makes sense to compare a few quotes.
Concrete work that often goes with a deck
Concrete Floor Stripping & Removal
Worth a look if your patio, garage or deck carries layers of paint or sealer that have to come off cleanly before any new finish will stick.
Epoxy Floor Coatings
A good fit when your garage or patio slab is stained or worn and you want a tough, easy-to-clean finish laid on properly prepped concrete.
Service areas for pool deck work around Atwater
Atwater Epoxy Floors and Concrete is based in the City of Atwater, CA. The 12 service areas below each have their own page, from Winton to Livingston, and we work in other cities nearby too.
City of Atwater, CA
Get your pool deck checked before coating
Have the deck's rough square footage and a few photos of cracks, flaking or old coatings ready when you call or fill out the form, so the first conversation covers what I need to see.